BBT-10.2 Crank Adjusting Bike Cap Tool

This self - extracting crank cap tool is a must - have for bike enthusiasts. It can effortlessly remove and install self - extracting one - key release caps on Sram and Race Face cranks with a 16mm hex hole. The investment - cast steel construction with an 8mm hex key offers better leverage. It also works on 8 - point adjusting caps of Shimano Hollowtech II crank/bottom bracket systems. There's a built - in hook to lift the safety plate on the left - side Shimano Hollowtech II crank arms. The steel investment - cast body ensures durability. For seized caps, you can optionally use an 8mm hex wrench.

Using this tool is easy. First, if you're working on Sram or Race Face cranks, align the tool with the 16mm hex hole of the self - extracting one - key release cap. Then, turn the tool to remove or install the cap. When dealing with Shimano Hollowtech II systems, use it to handle the 8 - point adjusting caps. And if you need to lift the safety plate on the left - side crank arm, use the built - in hook. When using an 8mm hex wrench for seized caps, be gentle at first to avoid damage. For maintenance, keep the tool clean after each use. You can wipe it with a dry cloth. Store it in a dry place to prevent rusting. This way, your tool will last a long time and keep performing well.