Dura-Ace R9100 SP41 Polymer-Coated Derailleur Cable Set White

Discover the Shimano Dura-Ace R9100 SP41 White Polymer-Coated Derailleur Cable Set. This set features a polymer-coated stainless steel inner cable that significantly reduces sliding resistance. This results in lighter and faster gear shifting operations and is rust-resistant. The OT-SP41 Housing comes pre-lubricated with silicone grease, and the sealed end caps keep dirt out. However, note that the low-friction polymer material on the cable might cause slippage at the cable fixing bolt after the initial pre-stretch. Available in white with Shimano/SRAM end types.

Using this cable set is easy. First, make sure your bike is in a stable position. Carefully remove the old derailleur cable set from your bike. Then, install the new Shimano Dura - Ace R9100 SP41 set. Thread the cable through the housing and attach it to the derailleur using the fixing bolt. After installation, perform an initial pre - stretch of the cable. But be aware that due to the low - friction polymer material, you might experience some slippage at the fixing bolt. If this happens, simply re - tighten the bolt. For maintenance, keep the cable and housing clean. You can wipe them down with a dry cloth regularly. Avoid exposing the cable set to extreme moisture to prevent rust, even though the cable is rust - resistant. Check the end caps frequently to ensure they are sealed properly to keep dirt out.