Regularly lubricating your bicycle chain with Park Tool CL - 1.2 Chain Lube can get rid of annoying squeaks and noises. This lube, formulated with a special blend of oils, works wonders in both wet and dry conditions. It can penetrate deep, reduce friction, extend the life of chain and drivetrain components, remove moisture, and protect parts from rust and corrosion. It's compatible with all bicycle chains and also serves as a great general - purpose light lubricant for brake and derailleur cables, housing, spoke nipples, and derailleur and brake pivots. Note that some painted surfaces may be sensitive to oil and grease. Clean off any excess right away and test on an inconspicuous area first to avoid stains or discoloration.
To use Park Tool CL - 1.2 Chain Lube, first, make sure your bicycle chain is clean. Then, apply the lube evenly along the chain, rotating the pedals slowly to let the lube penetrate. After application, wipe off any excess lube with a clean cloth. As for the brake and derailleur cables, housing, spoke nipples, and derailleur and brake pivots, just apply a small amount of the lube to keep them working smoothly. Remember, some painted surfaces are sensitive to oil and grease. So, clean off any excess oil or grease immediately. Before using it on a large area, test it on a small, hidden spot to see if it causes a stain or discoloration. For best results, re - lubricate your chain regularly, especially after riding in wet or dirty conditions.
